Manufacturing and sales of automatic packaging machineries "Omori Machinery Co. Ltd."

A machine capable of producing many different pack styles.10 product memory for one-touch, easy size change.

"Roller Drawer" style instant size change for forming and vacuum chambers available as option.

Base film drive by high accuracy servo motor allowing precise (0.1mm) pitch changes.

Base and lid film feed roller set up assures stable film unwinding with stable tension regardless of roll diameter.

Rotary date stamping (hot printer) eliminates type change (2 step date stamping with type change available as option).

Multiple wrapping styles such as Vacuum pack, Gas pack, Blister pack, Hot pack, steam shrink wrapping, etc. are available.

Clear and understandable machine status display with fault alarm allowing normal operation to be restored quickly.

The system is designed for factory automation and high efficiency.

High spec type

Model	FV6700	FV6800 (High-speed specification)
Speed(MAX)	Vacuum pack : 10 cycles /min	Vacuum pack : 20 cycles /min
	Gas pack : 10 cycles /min(MAX)	Gas pack : 20 cycles /min(MAX)
	Varies depending on condition such as products & trim cutting
Width of base film	AType:390~470mm(standard)
	BType:470~550mm(wide width)
Film used	Upper : Heat sealable stretchable oriented plastic films
	Lower : Thermo-formable and heat sealable non oriented plastic films
	Maximum:370mm
Draw depth	Normal : 70mm Conditioned : 60mm(MAX)
Products	Foods in general (solid, paste, liquid), General goods, Industrial goods
Main unitTotal Length	4,660mm(standard)
	5,660mm(1,000mmﾛﾝｸﾞ)
	6,660mm(2,000mmﾛﾝｸﾞ)
	〈Intermediate Length-consultation required.〉
Forming systems	Air-assist forming method by hot-plate	Servo drive type forming method
Seal method	Heat sealing method
Marking alignment	The penetration type is usually employed. (The reflection type is also possible)
Film feeding	Servo motor driven intermittent feeding method
Cross-cut system	Cylinder driven slide-cut method
Longitudinal cutting system	Direct-drive rotating blade
Film scrap remover	Vacuum & winder or cutting type
Air	0.6Mpa Approx. 100litere/shot ※(Differs depending on the specification.)
Cooling water	Over 0.25Mpa 4~5liter/min
Power used	3PH AC200V 12KVA ※(Differs depending on the specification.)
Machine weight	Approx. 1,300kg

*Specifications are subject to change depending on product and pack characteristics.

Forming/Vacuum Box Roller Drawer type

Overall Trimming device

Plug assist forming device

Additional horizontal cutter device

Bottom film print registration device

Additional longitudinal cutter device

Gas flushing specification

Longitudinal cutter perforated line cutting

Skin pack specification

Edge position controller (bobbin swing type)

Multi-lane specification

Discharge belt conveyor

Cooling press system

Discharge transfer device

Date stamping device

Various automatic product feeders

Rounded corners cross-cut system

Vacuum pump

Rounded corners slide device

Mechanical booster

I-notch cutter system

Air compressor